BILL NUMBER: SB 124 INTRODUCED BILL TEXT INTRODUCED BY Senator Corbett JANUARY 18, 2013 An act to amend Sections 4217.11 and 4217.16 of the Government Code, and to add Section 10780.6 to, and to add Article 7 (commencing with Section 10390) to Chapter 2 of Part 2 of Division 2 of, the Public Contract Code, relating to public contracts. LEGISLATIVE COUNSEL'S DIGEST SB 124, as introduced, Corbett. Public contracts: bid preferences: clean energy. Existing law imposes various requirements with respect to contracting by state agencies and the Trustees of the California State University. Existing law requires state agencies and to the Trustees of the California State University to use a competitive bidding process when contracting for goods and services. However, existing law allows a public agency to award an energy service contract if the governing body determines it is in the best interest of the agency and costs will be reduced, as specified. This bill would require state agencies and the Trustees of the California State University that accept bids or proposals for a contract for the purchase or installation of a clean energy device, technology, or system, as defined, to provide a 5% preference to a bidder that certifies that all of the parts of the clean energy device, technology, or system to be installed have been manufactured or assembled in the state, in accordance with specified criteria. This bill would authorize a public agency, including, but not limited to, the Trustees of the California State University, to award a contract based on the fact that a clean energy device, technology, or system was manufactured or assembled in the state if the contract is an energy service contract determined to be in the best interest of the public agency. Vote: majority. Appropriation: no. Fiscal committee: yes. State-mandated local program: no. THE PEOPLE OF THE STATE OF CALIFORNIA DO ENACT AS FOLLOWS: SECTION 1. The Legislature finds and declares all of the following: (a) California faces the most severe economic downturn since the Great Depression. Over two million Californians are out of work, and California's unemployment rate is one of the highest in the nation. (b) At a time of scarce state resources, state purchases should be used to stimulate our state economy and put people back to work. (c) The Green Building Executive Order (S-20-04) mandated that state agencies evaluate the merits of using clean and renewable onsite energy generation technologies in all new building or large renovation projects. (d) California has several companies that manufacture clean energy devices, technology, and systems in the state, employing Californians and helping our economy. (e) California is the nation's largest clean economy. More than 12,000 clean technology companies call California home and are creating jobs at nearly 10 times the rate of the state's other industries. A number of these companies have developed novel technologies, and it is in the interest of the state to incentivize these companies to establish and grow manufacturing operations within the state. This will create both construction and permanent manufacturing jobs in California. (f) It is the intent of the Legislature that a preference should be allowed for clean energy devices, technology, and systems manufactured in California. SEC. 2. Section 4217.11 of the Government Code is amended to read: 4217.11. The following terms, whenever used in this chapter, have the meanings given in this section, except where the context clearly indicates otherwise: (a) "Alternate energy equipment" means equipment for the production or conversion of energy from alternate sources as its primary fuel source, such as solar, biomass, wind, geothermal, hydroelectricity under 30 megawatts, remote natural gas of less than one billion cubic feet estimated reserves per mile from an existing gas gathering line, natural gas containing 850 or fewer British Thermal Units per standard cubic foot, or any other source of energy, the efficient use of which will reduce the use of fossil or nuclear fuels. (b) (1) "Clean energy device, technology, or system" means the following: (A) A device, technology, or system that contributes to improved energy management or efficiency. (B) Ultralow-emission equipment for energy generation based on thermal energy systems, including, but not limited to, natural gas turbines and fuel cells. (C) A device, technology, or system that conserves or produces heat, processes heat, space heating, water heating, steam, space cooling, refrigeration, mechanical energy, electricity, or in any form convertible to these uses, that does not expend or use conventional energy fuels, and that uses any of the following electrical generation technologies: (i) Biomass. (ii) Solar thermal. (iii) Photovoltaic. (iv) Wind. (v) Geothermal. (2) For the purposes of this subdivision, "conventional energy fuel" means any fuel derived from petroleum deposits, including, but not limited to, oil, heating oil, gasoline, fuel oil, or natural gas, including liquefied natural gas or nuclear fissionable materials.(b)(c) "Cogeneration equipment" means equipment for cogeneration, as defined in Section 216.6 of the Public Utilities Code.(c)(d) "Conservation measures" means equipment, maintenance, load management techniques and equipment, or other measures to reduce energy use or make for a more efficient use of energy.(d)(e) "Conservation services" means the electrical, thermal, or other energy savings resulting from conservation measures, which shall be treated as a supply of such energy.(e)(f) "Energy conservation facility" means alternate energy equipment, cogeneration equipment, or conservation measures located in public buildings or on land owned by public agencies.(f)(g) "Energy service contract" means a contract entered into by a public agency with any person, pursuant to which the person will provide electrical or thermal energy or conservation services to a public agency from an energy conservation facility.(g)(h) "Facility financing contract" means a contract entered into by a public agency with any person whereby the person provides financing for an energy conservation facility in exchange for repayment of the financing and all costs and expenses related thereto by the public agency. A facility financing contract may provide for the person with whom the public agency contracts to provide any combination of feasibility studies for, and design and construction of, all or part of the energy conservation facility in addition to the financing and other related services, and may provide for an installment sale purchase, another form of purchase, or amortized lease of the energy conservation facility by the public agency.(h)(i) "Facility ground lease" means a lease of all, or any portion of, land or a public building owned by, or under lease to, a public agency to a person in conjunction with an energy service contract or a facility financing contract. A facility ground lease may include, in addition to the land on which energy conservation facilities will be located, easements, rights-of-way, licenses, and rights of access, for the construction, use, or ownership by the person of the facility and all related utility lines not owned or controlled by the interconnecting utility, and offsite improvements related thereto. A facility ground lease may also include the addition or improvement of utility lines and equipment owned by the interconnecting utility which are necessary to permit interconnection between that utility and an energy conservation facility.(i)(j) "Person" means, but is not limited to, any individual, company, corporation, partnership, limited liability company, public agency, association, proprietorship, trust, joint venture, or other entity or group of entities.(j)(k) "Public agency" means the state, a county, city and county, city, district, community college district, school district, California State University, joint powers authority or other entity designated or created by a political subdivision relating to energy development projects, and any other political subdivision or public corporation in the state.(k)(l) "Public building" includes any structure, building, facility, or work which a public agency is authorized to construct or use, and automobile parking lots, landscaping, and other facilities, including furnishings and equipment, incidental to the use of any structure, building, facility, or work, and also includes the site thereof, and any easements, rights-of-way appurtenant thereto, or necessary for its full use. SEC. 3. Section 4217.16 of the Government Code is amended to read: 4217.16. Prior to awarding or entering into an agreement or lease, the public agency may request proposals from qualified persons. After evaluating the proposals, the public agency may award the contract on the basis of the experience of the contractor, the type of technology employed by the contractor, the cost to the local agency, whether the clean energy device or technology is manufactured or assembled in California, and any other relevant considerations. The public agency may utilize the pool of qualified energy service companies established pursuant to Section 388 of the Public Utilities Code and the procedures contained in that section in awarding the contract. SEC. 4. Article 7 (commencing with Section 10390) is added to Chapter 2 of Part 2 of Division 2 of the Public Contract Code, to read: Article 7. Preference for California-Manufactured Clean Energy Devices, Technology, and Systems 10390. For the purposes of this article: (a) (1) "Clean energy device, technology, or system" means the following: (A) A device, technology, or system that contributes to improved energy management or efficiency. (B) Ultralow-emission equipment for energy generation based on thermal energy systems, including, but not limited to, natural gas turbines and fuel cells. (C) A device, technology, or system that conserves or produces heat, processes heat, space heating, water heating, steam, space cooling, refrigeration, mechanical energy, electricity, or in any form convertible to these uses, that does not expend or use conventional energy fuels, and that uses any of the following electrical generation technologies: (i) Biomass. (ii) Solar thermal. (iii) Photovoltaic. (iv) Wind. (v) Geothermal. (2) For the purposes of this subdivision, "conventional energy fuel" means any fuel derived from petroleum deposits, including, but not limited to, oil, heating oil, gasoline, fuel oil, or natural gas, including liquefied natural gas or nuclear fissionable materials. (b) "Power purchase agreement" means a financial arrangement in which a third-party developer owns, operates, and maintains a clean energy device, technology, or system, and a state agency agrees to site the device, technology, or system on its roof or elsewhere on its property and purchases the device, technology, or system's electric output, not the device, technology, or system itself, from the third-party developer for a predetermined period of time. 10391. (a) A state agency that accepts bids or proposals for a contract for the purchase or installation of a clean energy device, technology, or system through a power purchase agreement or a direct purchase shall provide a preference of 5 percent to a bidder that certifies that all of the parts of the clean energy device, technology, or system to be installed have been manufactured or assembled in this state. The preference shall be provided as follows: (1) For solicitations to be awarded to the lowest responsible bidder meeting specifications, the preference to a bidder that certifies that all of the parts of the clean energy device, technology, or system to be installed have been manufactured or assembled in this state shall be 5 percent of the bid price of the lowest responsible bidder meeting specifications. (2) For solicitations to be awarded to the highest scored bidder based on evaluation factors in addition to price, the preference to a bidder that certifies that all of the parts of the clean energy device, technology, or system to be installed have been manufactured or assembled in this state shall be 5 percent of the total score of the highest scored bidder. (3) A preference awarded pursuant to paragraph (1) or (2) shall not be awarded to a noncompliant bidder and shall not be used to satisfy any applicable minimum requirements. (4) In order to be eligible for the 5-percent preference authorized pursuant to this section, a bidder shall submit all required substantiating documentation and information needed by the state agency to determine if the bidder is eligible for the preference, including, but not limited to, documentation regarding the identity of the manufacturer or assembler of the clean energy device, technology, or system and the location or locations where the parts of the clean energy device, technology, or system will be manufactured or assembled. (5) If, after application of the preferences set forth in this section, more than one bid qualified as the lowest responsible bid or the highest scored bid, the state agency shall award the contract to the bidder that has the highest number of full-time employees who assemble or manufacture the parts of the clean energy device, technology, or system in the state when the contract is let. (b) The Department of General Services shall establish a process to verify that a bidder meets the criteria for the 5-percent preference. SEC. 5. Section 10780.6 is added to the Public Contract Code, to read: 10780.6. (a) For the purposes of this section: (1) (A) "Clean energy device, technology, or system" means the following: (i) A device, technology, or system that contributes to improved energy management or efficiency. (ii) Ultralow-emission equipment for energy generation based on thermal energy systems, including, but not limited to, natural gas turbines and fuel cells. (iii) A device, technology, or system that conserves or produces heat, processes heat, space heating, water heating, steam, space cooling, refrigeration, mechanical energy, electricity, or in any form convertible to these uses, that does not expend or use conventional energy fuels, and that uses any of the following electrical generation technologies: (I) Biomass. (II) Solar thermal. (III) Photovoltaic. (IV) Wind. (V) Geothermal. (B) For the purposes of this subdivision, "conventional energy fuel" means any fuel derived from petroleum deposits, including, but not limited to, oil, heating oil, gasoline, fuel oil, or natural gas, including liquefied natural gas or nuclear fissionable materials. (2) "Power purchase agreement" means a financial arrangement in which a third-party developer owns, operates, and maintains a clean energy device, technology, or system, and the trustees agree to site the device, technology, or system on their roof or elsewhere on their property and purchases the device, technology, or system's electric output, not the device, technology, or system itself, from the third-party developer for a predetermined period of time. (b) The trustees that accept bids or proposals for a contract for the purchase or installation of a clean energy device, technology, or system through a power purchase agreement or a direct purchase shall provide a preference of 5 percent to a bidder that certifies that all of the parts of the clean energy device, technology, or system to be installed have been manufactured or assembled in this state. The preference shall be provided as follows: (1) For solicitations to be awarded to the lowest responsible bidder meeting specifications, the preference to a bidder that certifies that all of the parts of the clean energy device, technology, or system to be installed have been manufactured or assembled in this state shall be 5 percent of the bid price of the lowest responsible bidder meeting specifications. (2) For solicitations to be awarded to the highest scored bidder based on evaluation factors in addition to price, the preference to a bidder that certifies that all of the parts of the clean energy device, technology, or system to be installed have been manufactured or assembled in this state shall be 5 percent of the total score of the highest scored bidder. (3) A preference awarded pursuant to paragraph (1) or (2) shall not be awarded to a noncompliant bidder and shall not be used to satisfy any applicable minimum requirements. (4) In order to be eligible for the 5-percent preference authorized pursuant to this section, a bidder shall submit all required substantiating documentation and information needed by the trustees to determine if the bidder is eligible for the preference, including, but not limited to, documentation regarding the identity of the manufacturer or assembler of the clean energy device, technology, or system and the location or locations where the parts of the clean energy device, technology, or system will be manufactured or assembled. (5) If, after application of the preferences set forth in this section, more than one bid qualifies as the lowest responsible bid or the highest scored bid, the trustees shall award the contract to the bidder that has the highest number of full-time employees who assemble or manufacture the parts of the clean energy device, technology, or system in the state when the contract is let. (c) The Department of General Services shall establish a process to verify that a bidder meets the criteria for the 5-percent preference.