83R8615 SLB-D
	By: J. Davis of Harris	H.B. No. 2179

	A BILL TO BE ENTITLED
	AN ACT
	relating to the regulation of backflow prevention assembly testers
	by the Texas State Board of Plumbing Examiners; authorizing a fee.
	BE IT ENACTED BY THE LEGISLATURE OF THE STATE OF TEXAS:
	SECTION 1.  Subchapter B, Chapter 1301, Occupations Code, is
	amended by adding Section 1301.059 to read as follows:
	Sec. 1301.059.  BACKFLOW PREVENTION ASSEMBLY NOT EXEMPT.
	The exemptions under this subchapter do not apply to an activity for
	which a person is required to hold a backflow prevention assembly
	testing certificate.
	SECTION 2.  The heading to Section 1301.351, Occupations
	Code, is amended to read as follows:
	Sec. 1301.351.  LICENSE, ENDORSEMENT, [OR] REGISTRATION, OR
	CERTIFICATE REQUIRED.
	SECTION 3.  Section 1301.351, Occupations Code, is amended
	by amending Subsections (a) and (a-2) and adding Subsections (e)
	and (f) to read as follows:
	(a)  Except as provided by Subsection (f), a [A] person,
	other than a responsible master plumber, may not engage in plumbing
	unless:
	(1)  the person holds the proper license, registration,
	or endorsement required by this chapter; and
	(2)  the person's work is supervised and controlled by a
	person licensed under this chapter.
	(a-2)  Except as provided by Subsection (f), a [A] person
	that advertises or otherwise offers to perform or provide plumbing
	must secure the services of a responsible master plumber.
	(e)  Unless the person holds a certificate under Section
	1301.360, a person may not:
	(1)  engage in the repair or testing of the
	installation or operation of a backflow prevention assembly; or
	(2)  advertise and offer to perform or provide backflow
	prevention assembly testing services as described by Subdivision
	(1).
	(f)  A person who holds a certificate under Section 1301.360:
	(1)  is not required to have the person's work described
	by Subsection (e)(1) supervised and controlled by a person licensed
	under this chapter; and
	(2)  may advertise and offer to perform or provide
	services as described by Subsection (e)(2).
	SECTION 4.  Subchapter G, Chapter 1301, Occupations Code, is
	amended by adding Section 1301.360 to read as follows:
	Sec. 1301.360.  BACKFLOW PREVENTION ASSEMBLY TESTING
	CERTIFICATE. (a) The board shall issue a backflow prevention
	assembly testing certificate to an applicant who:
	(1)  holds a high school diploma or its equivalent;
	(2)  demonstrates at least two years of related work
	experience as determined by the board;
	(3)  completes a training course approved by the board;
	(4)  passes an examination prescribed by the board;
	(5)  submits an application on a form prescribed by the
	board; and
	(6)  pays the required fee.
	(b)  A certificate issued under this section expires on the
	third anniversary of the date of issuance.
	(c)  Notwithstanding Subsection (a), the board shall issue a
	backflow prevention assembly testing certificate to a person who
	holds a current equivalent license, certificate, or registration
	issued by another state if:
	(1)  the requirements to obtain the license,
	certificate, or registration in the other state are substantially
	equivalent to the requirements of Subsection (a), including the
	examination requirement; and
	(2)  the license, certificate, or registration is
	mandatory for the repair or testing of the installation or
	operation of a backflow prevention assembly in the state in which
	the license, certificate, or registration is issued.
	SECTION 5.  Section 1301.401(a), Occupations Code, is
	amended to read as follows:
	(a)  Except as provided by Section 1301.360(b), a [A]
	license, certificate, or registration under this chapter is valid
	for one year. On payment of the required fee, a license,
	certificate, or registration may be renewed for the appropriate
	term [annually].
	SECTION 6.  Sections 1301.404(a) and (b), Occupations Code,
	are amended to read as follows:
	(a)  The board shall recognize, approve, and administer
	continuing education programs for a person [persons] who holds a
	license, certificate, [hold licenses] or endorsement
	[endorsements] under this chapter.
	(b)  A person who holds a license, certificate, or
	endorsement under this chapter must complete at least six hours of
	continuing professional education each year the person holds the
	license, certificate, or endorsement to renew the person's license,
	certificate, or endorsement. Three of the six hours must be in the
	subjects of health protection, energy conservation, and water
	conservation.
	SECTION 7.  Subchapter C, Chapter 341, Health and Safety
	Code, is amended by adding Section 341.0345 to read as follows:
	Sec. 341.0345.  CERTIFICATION OF BACKFLOW PREVENTION
	ASSEMBLY TESTERS. A person who repairs or tests the installation or
	operation of backflow prevention assemblies must hold a certificate
	issued by the Texas State Board of Plumbing Examiners under Section
	1301.360, Occupations Code.
	SECTION 8.  Section 341.034(c), Health and Safety Code, is
	repealed.
	SECTION 9.  (a)  Not later than November 1, 2013, the Texas
	State Board of Plumbing Examiners shall adopt rules necessary to
	implement the changes in law made by this Act, including any
	amendments to rules described by Section 10(b) of this Act.
	(b)  Not later than January 1, 2014, the Texas State Board of
	Plumbing Examiners shall begin accepting applications for and
	issuing backflow prevention assembly testing certificates under
	Section 1301.360, Occupations Code, as added by this Act.
	SECTION 10.  (a) On January 1, 2014, the following are
	transferred to the Texas State Board of Plumbing Examiners:
	(1)  all powers, duties, obligations, and liabilities
	of the Texas Commission on Environmental Quality relating to the
	licensing of backflow prevention assembly testers; and
	(2)  all files and other records of the Texas
	Commission on Environmental Quality kept by the commission
	regarding backflow prevention assembly tester licenses.
	(b)  A rule adopted by the Texas Commission on Environmental
	Quality that is in effect immediately before January 1, 2014, and
	that relates to backflow prevention assembly tester licenses is, on
	January 1, 2014, a rule of the Texas State Board of Plumbing
	Examiners and remains in effect until amended or repealed by the
	Texas State Board of Plumbing Examiners.
	(c)  In the period beginning on the effective date of this
	Act and ending on January 1, 2014, the Texas Commission on
	Environmental Quality shall continue to perform functions and
	activities under Section 341.034(c), Health and Safety Code, as if
	that subsection had not been repealed by this Act, and the former
	law is continued in effect for that purpose.
	(d)  A person who holds a backflow prevention assembly tester
	license issued by the Texas Commission on Environmental Quality
	that is in effect on the effective date of this Act holds a backflow
	prevention assembly testing certificate under Section 1301.360,
	Occupations Code, as added by this Act, that expires on the
	expiration date of the license.
	SECTION 11.  (a)  Except as provided by Subsection (b) of
	this section, this Act takes effect September 1, 2013.
	(b)  Section 1301.351(e), Occupations Code, as added by this
	Act, and the repeal by this Act of Section 341.034(c), Health and
	Safety Code, take effect January 1, 2014.