Bill Text: AZ SB1272 | 2023 | Fifty-sixth Legislature 1st Regular | Engrossed
Bill Title: CTEs; in-demand programs; funding
Spectrum: Partisan Bill (Republican 1-0)
Status: (Engrossed - Dead) 2023-02-28 - House read second time [SB1272 Detail]
Download: Arizona-2023-SB1272-Engrossed.html
|
Senate Engrossed
CTEs; in-demand programs; funding |
|
State of Arizona Senate Fifty-sixth Legislature First Regular Session 2023
|
|
SENATE BILL 1272 |
|
|
|
|
An Act
repealing section 15-249.15, Arizona Revised Statutes; amending sections 15-393, 15-393.01 and 15-398, Arizona Revised Statutes; relating to career technical education districts.
(TEXT OF BILL BEGINS ON NEXT PAGE)
Be it enacted by the Legislature of the State of Arizona:
Section 1. Repeal
Section 15-249.15, Arizona Revised Statutes, is repealed.
Sec. 2. Section 15-393, Arizona Revised Statutes, is amended to read:
15-393. Career technical education district governing board; report; definitions
A. The management and control of a career technical education district are vested in the career technical education district governing board, including the content and quality of the courses offered by the district, the quality of teachers who provide instruction on behalf of the district, the salaries of teachers who provide instruction on behalf of the district and the reimbursement of other entities for the facilities used by the district. This section does not restrict a school district from offering any career and technical education course that does not qualify for funding as a career technical education course or career technical education district program. Unless the governing boards of the school districts participating in the formation of the career technical education district vote to implement an alternative election system as provided in subsection B of this section, the career technical education board consists of five members elected from five single member districts formed within the career technical education district. The single member district election system shall be submitted as part of the plan for the career technical education district pursuant to section 15-392 and shall be established in the plan as follows:
1. The governing boards of the school districts participating in the formation of the career technical education district shall define the boundaries of the single member districts so that the single member districts are as nearly equal in population as is practicable, except that if the career technical education district lies in part in each of two or more counties, at least one single member district may be entirely within each of the counties comprising the career technical education district if this district design is consistent with the obligation to equalize the population among single member districts.
2. The boundaries of each single member district shall follow election precinct boundary lines, as far as practicable, in order to avoid further segmentation of the precincts.
3. A person who is a registered voter of this state and who has been a resident of the single member district for at least one year immediately preceding the date of the election is eligible for election to the office of career technical education board member from the single member district. The terms of office of the members of the career technical education board shall be as prescribed in section 15-427, subsection B. An employee of a career technical education district or the spouse of an employee shall not hold membership on a governing board of a career technical education district by which the employee is employed. A member of one school district governing board or career technical education district governing board is ineligible to be a candidate for nomination or election to or serve simultaneously as a member of any other governing board, except that a member of a governing board may be a candidate for nomination or election for any other governing board if the member is serving in the last year of a term of office. A member of a governing board shall resign the member's seat on the governing board before becoming a candidate for nomination or election to the governing board of any other school district or career technical education district, unless the member of the governing board is serving in the last year of a term of office. Members of a career technical education district governing board are subject to the conflict of interest requirements prescribed in section 38-503.
4. Nominating petitions shall be signed by the number of qualified electors of the single member district as provided in section 16-322.
B. The governing boards of the school districts participating in the formation of the career technical education district may vote to implement any other alternative election system for the election of career technical education district board members. If an alternative election system is selected, it shall be submitted as part of the plan for the career technical education district pursuant to section 15-392, and the implementation of the system shall be as approved by the United States justice department.
C. Career technical education districts are subject to the following provisions of this title:
1. Chapter 1, articles 1, 2, 3, 4, 5 and through 6.
2. Sections 15-208, 15-210, 15-213 and 15-234.
3. Articles 2, 3 and 5 of this chapter.
4. Section 15-361.
5. Chapter 4, articles 1, 2 and 5.
6. Chapter 5, articles 1 and 3.
7. Sections 15-701.01, 15-722, 15-723, 15-724, 15-727, 15-728, 15-729 and 15-730.
8. Chapter 7, article 5.
9. Chapter 8, articles 1, 3 and 4.
10. Sections 15-828 and 15-829.
11. Chapter 9, article 1, article 6, except for section 15-995, and article 7.
12. Sections 15-941, 15-943.01, 15-953 and 15-973.
13. Sections 15-1101 and 15-1104.
14. Chapter 10, articles 2, 3, 4 and 8.
D. Notwithstanding subsection C of this section, the following apply to a career technical education district:
1. A career technical education district may issue bonds for the purposes specified in section 15-1021 and in chapter 4, article 5 of this title to an amount in the aggregate, including the existing indebtedness, not exceeding one percent of the net assessed value of the full cash value of the property within the career technical education district. For the purposes of this paragraph, "full cash value" and "net assessed value" have the same meanings prescribed in section 42-11001.
2. The number of governing board members for a career technical education district shall be as prescribed in subsection A of this section.
3. The student count for the first year of operation of a career technical education district as provided in this article shall be determined as follows:
(a) Determine the estimated student count for career technical education district classes that will operate in the first year of operation. This estimate shall be based on actual registration of pupils as of March 30 scheduled to attend classes that will be operated by the career technical education district. The student count for the school district of residence of the pupils registered at the career technical education district shall be adjusted. The adjustment shall cause the school district of residence to reduce the student count for the pupil to reflect the courses to be taken at the career technical education district. The school district of residence shall review and approve the adjustment of its own student count as provided in this subdivision before the pupils from the school district can be added to the student count of the career technical education district.
(b) The student count for the new career technical education district shall be the student count as determined in subdivision (a) of this paragraph.
(c) For the first year of operation, the career technical education district shall revise the student count to the actual average daily membership as prescribed in section 15-901, subsection A, paragraph 1 for students attending classes in the career technical education district. A career technical education district shall revise its student count, the base support level as provided in section 15-943.02, the revenue control limit as provided in section 15-944.01 and the district additional assistance as provided in section 15-962.01 before May 15. A career technical education district that overestimated its student count shall revise its budget before May 15. A career technical education district that underestimated its student count may revise its budget before May 15.
(d) After March 15 of the first year of operation, the school district of residence shall adjust its student count by reducing it to reflect the courses actually taken at the career technical education district. The school district of residence shall revise its student count, the base support level as provided in section 15-943, the revenue control limit as provided in section 15-944 and the district additional assistance as provided in section 15-962.01 prior to May 15. A district that underestimated the student count for students attending the career technical education district shall revise its budget before May 15. A district that overestimated the student count for students attending the career technical education district may revise its budget before May 15.
(e) The procedures for implementing this paragraph shall be as prescribed in the uniform system of financial records.
For the purposes of this paragraph, "school district of residence" means the school district that included the pupil in its average daily membership for the year before the first year of operation of the career technical education district and that would have included the pupil in its student count for the purposes of computing its base support level for the fiscal year of the first year of operation of the career technical education district if the pupil had not enrolled in the career technical education district.
4. A student includes any person enrolled in the career technical education district without regard to the person's age or high school graduation status, except that:
(a) A student in a kindergarten program or in any of grades one through eight who enrolls in courses offered by the career technical education district shall not be included in the career technical education district's student count or average daily membership.
(b) A student in a kindergarten program or in any of grades one through eight who is enrolled in career and technical education courses shall not be funded in whole or in part with monies provided by a career technical education district, except that a pupil in grade eight may be funded with monies generated by the $.05 qualifying tax rate authorized in subsection F of this section.
(c) A student who has graduated from high school or received a general equivalency diploma or who is over twenty-one years of age shall not be included in the student count of the career technical education district for the purposes of chapter 9, articles 3, 4 and 5 of this title.
5. A career technical education district may operate for more than one hundred eighty days per year, or less, with the equivalent number of hours of instruction.
6. A career technical education district may use the carryforward provisions of section 15-943.01.
7. A school district that is part of a career technical education district shall use any monies received pursuant to this article to supplement and not supplant base year career and technical education courses, and directly related equipment and facilities, except that a school district that is part of a career technical education district and that has used monies received pursuant to this article to supplant career and technical education courses that were offered before the first year that the school district participated in the career technical education district or the first year that the school district used monies received pursuant to this article or that used the monies for purposes other than for career and technical education courses shall use one hundred percent of the monies received pursuant to this article to supplement and not supplant base year career and technical education courses. Each applicable school district shall provide a report to the career technical education board and the department of education outlining the required maintenance of effort and how monies were used to supplement and not supplant base year career and technical education courses and directly related equipment and facilities.
8. A career technical education district shall use any monies received pursuant to this article to enhance and not supplant career and technical education courses and directly related equipment and facilities.
9. A career technical education district or a school district that is part of a career technical education district or a charter school shall only include pupils in grades nine through twelve and pupils in the school year immediately following graduation in the calculation of student count or average daily membership if the pupils are enrolled in courses that are approved jointly by the governing board of the career technical education district and each participating school district or charter school for satellite courses taught within the participating school district or charter school, or approved solely by the career technical education district for centrally located courses. Funding may be provided for not more than four years for the same student. Student count and average daily membership from courses that are not part of an approved program for career and technical education shall not be included in student count and average daily membership of a career technical education district.
E. The career technical education board shall appoint a superintendent as the executive officer of the career technical education district.
F. Taxes may be levied for the support of the career technical education district as prescribed in chapter 9, article 6 of this title, except that a career technical education district shall not levy a property tax pursuant to law that exceeds $.05 per $100 assessed valuation except for bond monies pursuant to subsection D, paragraph 1 of this section. Such taxes shall be obtained from a levy of taxes on the taxable property used for secondary tax purposes.
G. The schools in the career technical education district are available to all persons who reside in the career technical education district and to pupils whose school district of residence within this state is paying tuition on behalf of the pupils to a district of attendance that is a member of the career technical education district, subject to the rules for admission prescribed by the career technical education board.
H. The career technical education board may collect tuition for adult students and the attendance of pupils who are residents of school districts that are not participating in the career technical education district pursuant to arrangements made between the governing board of the school district and the career technical education board.
I. The career technical education board may accept gifts, grants, federal monies, tuition and other allocations of monies to erect, repair and equip buildings and for the cost of operating the schools of the career technical education district.
J. One member of the career technical education board shall be selected chairman. The chairman shall be selected annually on a rotation basis from among the participating school districts. The chairman of the career technical education board shall be a voting member.
K. A career technical education board and a community college district may enter into agreements to provide for administrative, operational and educational services and facilities.
L. Any agreement between the governing board of a career technical education district and another career technical education district, a school district, a charter school or a community college district shall be in the form of an intergovernmental agreement or other written contract. The auditor general shall modify the uniform system of financial records and budget forms in accordance with this subsection. The intergovernmental agreement or other written contract shall completely and accurately specify each of the following:
1. The financial provisions of the intergovernmental agreement or other written contract and the format for the billing of all services.
2. The accountability provisions of the intergovernmental agreement or other written contract.
3. The responsibilities of each career technical education district, each school district, each charter school and each community college district that is a party to the intergovernmental agreement or other written contract.
4. The type of instruction that will be provided under the intergovernmental agreement or other written contract, including individualized education programs pursuant to section 15-763.
5. The quality of the instruction that will be provided under the intergovernmental agreement or other written contract.
6. The transportation services that will be provided under the intergovernmental agreement or other written contract and the manner in which transportation costs will be paid.
7. The amount that the career technical education district will contribute to a course and the amount of support required by the school district, the charter school or the community college.
8. That the services provided by the career technical education district, the school district, the charter school or the community college district be proportionally calculated in the cost of delivering the service.
9. That the payment for services shall not exceed the cost of the services provided.
10. That the career technical education district will provide the following minimum services for all member districts:
(a) Professional development of career and technical teachers in the career technical education district who are teaching programs or courses at a satellite campus.
(b) Ongoing evaluation and support of satellite campus programs and courses to ensure quality and compliance.
11. An itemized listing of other goods and services that are provided to the member district and that are paid for by the retention of satellite campus student funding.
M. A member school district or charter school may not submit requests to approve or add satellite campus career technical education district programs or courses directly to the career and technical education division of the department of education, but shall submit all appropriate application documentation and materials for programs or courses to the career technical education district. On approval from the career technical education board, a career technical education district shall only submit requests to approve or add satellite campus career technical education district programs or courses directly to the career and technical education division of the department of education, which shall determine whether the criteria prescribed in section 15-391, paragraphs 2 and 4 have been met. If the career and technical education division of the department of education determines that a course does not meet the criteria for approval as a career technical education course, the governing board of the career technical education district may appeal this decision to the state board of education acting as the state board of vocational education.
N. Notwithstanding any other law, the average daily membership for a pupil who is enrolled in a career technical education course and who does not meet the criteria specified in subsection P, Q or R of this section shall be 0.25 for each course, except the sum of the average daily membership shall not exceed the limits prescribed by subsection D, P, Q or R of this section, as applicable.
O. If a career and technical education course or program is provided on a satellite campus, the sum of the average daily membership, as provided in section 15-901, subsection A, paragraph 1, for that pupil in the school district or charter school and career technical education district shall not exceed 1.25. The school district or charter school and the career technical education district shall determine the apportionment of the average daily membership for that pupil between the school district or charter school and the career technical education district. A pupil who attends a course or program at a satellite campus and who is not enrolled in the school district or charter school where the satellite campus is located may generate the average daily membership of up to 0.25 for one hundred fifty instructional hours of enrollment for instruction received during any hour of the day, during any day of the week and at any time between July 1 and June 30 of each fiscal year pursuant to this subsection if the pupil is enrolled in a school district that is a member district in the same career technical education district.
P. The sum of the average daily membership of a pupil who is enrolled in both the school district and career technical education course or career technical education program provided by a community college pursuant to subsection K of this section or at a centralized campus shall not exceed 1.75. The average daily membership for a pupil who is enrolled in a career technical education course or career technical education program provided by a community college shall be 0.25 for the accumulation of every three community college credits for which a student is enrolled in career technical education courses. The member school district and the career technical education district shall determine the apportionment of the average daily membership and student enrollment for that pupil between the member school district and the career technical education district, except that the amount apportioned shall not exceed 1.0 for either entity. Notwithstanding any other law, the average daily membership for a pupil who is in grade nine, ten, eleven or twelve or in the school year immediately following graduation and who is enrolled in a course that meets for at least one hundred fifty minutes per class period at a centralized campus shall be 0.75. To qualify for funding pursuant to this subsection, a centralized campus shall offer programs and courses to all eligible students in each member district of the career technical education district. Students in an approved career technical education program may generate an average daily membership of up to 1.75 for instruction received during any hour of the day, during any day of the week and at any time between July 1 and June 30 of each fiscal year. Average daily membership shall not be calculated on the one hundredth day of instruction for the purposes of this section. Average daily membership shall be calculated by dividing the instructional hours of enrollment by six hundred hours, except that:
1. At least one hundred fifty hours and less than three hundred hours equals 0.25 average daily membership.
2. At least three hundred hours and less than four hundred fifty hours equals 0.5 average daily membership.
3. At least four hundred fifty hours and less than six hundred hours equals 0.75 average daily membership.
4. At least six hundred hours equals 1.0 average daily membership.
Q. The average daily membership for a pupil who is in grade nine, ten, eleven or twelve or in the school year immediately following graduation and who is enrolled in a course that meets for at least one hundred fifty minutes per class period at a leased centralized campus shall not exceed 0.75. Students in an approved career technical education program provided by a leased centralized campus may generate an average daily membership for instruction received during any hour of the day, during any day of the week and at any time between July 1 and June 30 of each fiscal year. Average daily membership shall be calculated by dividing the instructional hours of enrollment by six hundred hours, except that:
1. At least one hundred fifty hours and less than three hundred hours equals 0.25 average daily membership.
2. At least three hundred hours and less than four hundred fifty hours equals 0.5 average daily membership.
3. At least four hundred fifty hours and less than six hundred hours equals 0.75 average daily membership.
4. At least six hundred hours equals 1.0 average daily membership.
R. The sum of the average daily membership, as provided in section 15-901, subsection A, paragraph 1, of a pupil who is enrolled in both the school district and in career technical education courses provided at a leased centralized campus shall not exceed 1.75 if all of the following conditions are met:
1. The course qualifies as a career technical education course.
2. The course is offered to all eligible students in each member district of the career technical education district and enrolls students from multiple high schools.
3. The career technical education district program in which the course is included addresses a specific industry need and has been developed in cooperation with that industry, or the leased facility is a state or federal asset that would otherwise be unused or underutilized.
4. The lease is established at fair market value if the lease is executed for a facility located on the site of a member district and was approved by the joint committee on capital review, except that a lease that was executed or renewed before December 31, 2012 is not subject to approval by the joint committee on capital review.
S. A student who is enrolled in an accommodation school may be treated as a student of the school district in which the student physically resides for the purposes of enrollment in a career technical education district and shall be included in the calculation of average daily membership for either the career technical education district or the accommodation school, or both.
T. Notwithstanding any other law, the student count for a career technical education district shall be equivalent to the career technical education district's average daily membership. Students in an approved career technical education program provided by a satellite campus, centralized campus or leased centralized campus may generate an average daily membership subject to the limits prescribed by subsections D, N, O, P, Q and R of this section, as applicable, for instruction received during any hour of the day, during any day of the week and at any time between July 1 and June 30 of each fiscal year. Average daily membership shall not be calculated on the one hundredth day of instruction for the purposes of this section. The department may not restrict the instructional time by limiting the particular days of the week or time of the fiscal year for instruction to occur.
U. A school district or charter school may not prohibit or discourage students who are enrolled in that school district or charter school from attending courses offered by a career technical education district, including requiring students to generate a full 1.0 average daily membership or to enroll in more courses than are needed to graduate before enrolling in and attending programs or courses offered by a career technical education district.
V. The governing board of the career technical education district may contract with any charter school that is located within the boundaries of the career technical education district to allow that charter school to offer career and technical education courses or programs as a satellite campus.
W. Beginning in 2020 and every five years thereafter, the career and technical education division of the department of education shall review career technical education district programs and career technical education courses to ensure compliance, quality and eligibility. Any program or course deemed to not meet the requirements set forth by law shall not be funded for the current school year and shall be removed from the approved program and course list for the purposes of funding. The career and technical education division may establish a staggered schedule for reviewing each career technical education district.
X. Notwithstanding subsection D, paragraphs 4 and 9 and subsections P, Q and R of this section, for a student in grade nine, funding shall be provided pursuant to this section only if the student reaches the fortieth day of grade eleven enrolled in an approved career technical education program and meets the requirements prescribed in subsection Z of this section. At that time funding shall be provided for that student for grade nine and for any subsequent year in which the student is eligible for funding pursuant to this section.
Y. On or before September 1 of each year, the office of economic opportunity in collaboration with the department of education shall compile an in-demand regional education list of the approved career technical education programs that lead to a career path in high demand with median-to-high-wage jobs in that region. The office of economic opportunity shall incorporate industry feedback as part of developing the in-demand regional educational list. The office of economic opportunity shall submit the in-demand regional education list to the Arizona career and technical education quality commission for review and approval.
Z. Notwithstanding subsection D, paragraphs 4 and 9 and subsections P, Q and R of this section, for a student in grade nine or in the school year immediately following graduation, funding shall be provided pursuant to this section only if the student is enrolled in a program that was included on the in-demand regional education list compiled pursuant to subsection Y of this section for that student's region for the year in which the student began the program.
AA. X. For the purposes of this section:
1. "Base year" means the complete school year in which voters of a school district elected to join a career technical education district.
2. "Centralized campus" means a facility that is owned and operated by a career technical education district to offer career technical education district programs or career technical education courses.
3. "Lease" means a written agreement in which the right to occupy or use real property is conveyed from one person or entity to another person or entity for a specified period of time.
4. "Leased centralized campus" means a facility that is leased and operated by a career technical education district to offer career technical education district programs or career technical education courses.
5. "Satellite campus" means a facility that is owned or operated by a school district or charter school to offer career technical education district programs or career technical education courses.
Sec. 3. Section 15-393.01, Arizona Revised Statutes, is amended to read:
15-393.01. Career technical education districts; annual report; performance and accountability
A. The department of education shall include each career technical education district in the department's annual achievement profiles required by section 15-241, except that a career technical education district may not be assigned a letter grade pursuant to section 15-241. Subject to approval by the state board of education, the department shall develop specific criteria applicable to career technical education districts that may not be based solely on the criteria prescribed in the Carl D. Perkins vocational education act, as amended by the Carl D. Perkins vocational and applied technology education act amendments of 1990, as amended by the Carl D. Perkins vocational and technical education act of 1998. The department shall include all of the following performance indicators in the annual achievement profiles and provide a copy of the information to each career technical education district governing board:
1. The graduation rate of all students enrolled in a career and technical education program or course.
2. The completion rate for each program offered by the career technical education district.
3. Performance on assessments required pursuant to section 15-391, paragraph 4, subdivision (b).
4. Postgraduation employment rates, postsecondary enrollment rates and military service rates for students who complete a career and technical education program.
B. A career technical education district is subject to the performance audits pursuant to section 41-1279.03, subsection A, paragraph 9. The auditor general shall consider the differences and applicable laws for a career technical education district when conducting a performance audit for a career technical education district.
C. On or before December 31 of each year, the career and technical education division of the department of education shall submit a career technical education district annual report to the governor, the president of the senate and the speaker of the house of representatives and shall submit a copy of this report to the secretary of state. The career and technical education division of the department of education shall submit a copy of this report to the joint legislative budget committee for review. The annual report shall include the following:
1. The average daily membership of each career technical education district, including the average daily membership of each centralized campus, satellite campus and leased centralized campus as defined in section 15-393.
2. The actual student count of each career technical education district, including the student count of each centralized campus, satellite campus and leased centralized campus as defined in section 15-393.
3. The programs and corresponding courses offered by each career technical education district, including the location of each program and course.
4. For each career technical education district based on program or course location:
(a) The student enrollment of each program and corresponding course.
(b) The percentage of students who enrolled in the second year of each program and corresponding course relative to the number of students in the same cohort who enrolled in the first year of each program and corresponding course.
(c) The percentage of students who completed each program relative to the number of students in the same cohort who began the program.
5. The costs associated with each program offered by the career technical education district.
6. A listing of any programs or courses that were discontinued by review of the career and technical education division pursuant to section 15-393, subsection W.
7. A listing of any programs or courses that were continued by review of the career and technical education division pursuant to section 15-393, subsection W.
8. A listing of any programs or courses that were added by the career and technical education division.
9. For applicable school districts, the required maintenance of effort and how monies were used to supplement and not supplant base year career and technical education courses, including expenditures related to personnel, equipment and facilities.
10. For students who meet the requirements to receive funding pursuant to section 15-393, subsection X, students enrolled in an internship course in grade nine and students enrolled in the year immediately following graduation, a separate listing of the following information for each district:
(a) Average daily membership.
(b) The actual student count.
(c) Enrollment by course or program and persistence at each grade level toward completion of the program.
(d) The percentage of students who completed each program.
(e) The number of certifications and licenses earned by students delineated by those who attended a satellite program and those who attended a centralized campus.
11. Any other data or information deemed necessary by the department of education.
D. The office of the auditor general, in consultation with the department of education, shall develop and establish uniform cost reporting guidelines, policies and procedures for career technical education district programs. Any guideline, policy or procedure shall allow for the effective comparison of cost between career technical education district programs.
Sec. 4. Section 15-398, Arizona Revised Statutes, is amended to read:
15-398. Career technical education districts; associate degrees; requirements; reports; definitions
A. Notwithstanding any other law, a career technical education district may offer associate degrees that are accredited by a regional or national accreditation agency approved by the United States department of education. Beginning on September 24, 2022, any career technical education district seeking to offer an associate degree program pursuant to this section shall apply for accreditation from a regional accreditation agency.
B. Each career technical education district that offers an associate degree program pursuant to this section must meet both of the following:
1. All applicable regional or national accreditation requirements.
2. All applicable state licensure requirements.
C. A career technical education district may offer associate degrees only for career technical education district programs that are on the in-demand regional education list compiled pursuant to section 15-393. When determining whether to offer an associate degree program, the career technical education board shall make its determination based on all of the following criteria:
1. Whether the career technical education district is able to demonstrate industry demand for the associate degree program.
2. A financial analysis that shows the short-term and long-term impacts to initiate and sustain the associate degree program, including all of the following:
(a) The source of monies.
(b) Facilities requirements.
(c) Faculty.
(d) Personnel.
(e) Administrative costs.
3. Whether the associate degree program would unnecessarily duplicate the degree programs offered by other institutions of higher education in this state.
4. The ability of the career technical education district to support the associate degree program with and the adequacy of the facilities, faculty, administration, libraries and other resources.
D. A career technical education district that is located in the same county as the main campus of any public university or community college district and that is developing an associate degree program shall notify the public university or community college at least sixty days before submitting the report prescribed in subsection E of this section. Within thirty days after the date the career technical education district submits the notice, the public university or community college may provide a written response to the career technical education board for its review. This subsection does not allow a public university or community college to prevent a career technical education district from offering an associate degree program.
E. Before the career technical education board authorizes an associate degree program, the career technical education district must submit a report to the career technical education board that includes all of the following information:
1. The name of the proposed academic degree program.
2. The academic department that will offer the proposed degree program.
3. Whether the instructional modality would be immersion or online, or both.
4. The total credit hours necessary to complete the proposed degree program.
5. The proposed inception term.
6. A brief description of the proposed degree program.
7. A learning outcomes and assessment plan, including:
(a) Concepts.
(b) Competencies.
(c) Assessment methods and measures.
8. The projected enrollment by year for the first three years the degree program is offered.
9. Evidence of market demand for the proposed degree program.
10. Similar degree programs offered at other institutions of higher education in this state.
11. The new resources required, including a long-term plan for faculty recruitment that indicates the ability to pay the salaries of faculty and identifies recruitment strategies for new faculty.
12. Any written responses provided by a public university or community college pursuant to subsection D of this section.
13. Proof of transferability of credits earned in the proposed degree program to another accredited institution for each program offered.
F. Each career technical education district that offers an associate degree program pursuant to this section shall submit a report to the joint legislative audit committee on or before October 1 of the fifth year after initially offering that associate degree program. The report shall review the first five years of the associate degree program at the career technical education district and shall include all of the following:
1. The number of:
(a) Associate degree programs implemented at the career technical education district.
(b) Applicants to each associate degree program.
(c) Applicants who are admitted into each associate degree program.
(d) Applicants who are enrolled in each associate degree program.
(e) Applicants who received degrees from each associate degree program.
2. The costs of each associate degree program, including cost per degree and the funding sources that are used to finance each degree program.
3. Current trends in workforce demands that require associate degrees in each specific associate degree program offered.
4. Current completion and continuation rates, if available, for each cohort of students participating in each associate degree program.
5. The extent to which each associate degree program fulfills identified workforce needs for new associate degree programs.
6. Information on the job placement of graduates of each associate degree program.
7. For each associate degree program, the costs to students, the amount of financial aid offered and the student debt levels of graduates.
8. Time-to-degree rates and completion rates for each associate degree program.
G. On or before December 1 of each year, each career technical education district that offers an associate degree program shall report to the governor, the president of the senate, the speaker of the house of representatives and the joint legislative budget committee all of the following information for the immediately preceding school year:
1. The total number of students pursuing an associate degree at the career technical education district pursuant to this section.
2. The total number of associate degrees completed at the career technical education district.
3. Workforce data showing demand for each associate degree program offered at the career technical education district.
4. The average cost of tuition per credit hour for each associate degree program offered at the career technical education district.
H. Each career technical education district that offers an associate degree program pursuant to this section shall provide the student, at the time of enrollment in a program, with a list of institutions to which the student's associate degree is transferable.
I. For the purposes of this section:
1. "Community college" has the same meaning prescribed in section 15-1401.
2. "Community college district" means a district as defined in section 15-1401.
3. "Main campus" means the central location of a public university's or community college district's library system and computer center.
4. "Public university" means a university under the jurisdiction of the Arizona board of regents.
