Bill Text: TX SB666 | 2011-2012 | 82nd Legislature | Introduced


Bill Title: Relating to identification requirements for certain fire hydrants and flush valves.

Spectrum: Partisan Bill (Democrat 1-0)

Status: (Introduced - Dead) 2011-03-16 - Referred to Natural Resources [SB666 Detail]

Download: Texas-2011-SB666-Introduced.html
  82R9333 JSC-D
 
  By: Hinojosa S.B. No. 666
 
 
 
A BILL TO BE ENTITLED
 
AN ACT
  relating to identification requirements for certain fire hydrants
  and flush valves.
         BE IT ENACTED BY THE LEGISLATURE OF THE STATE OF TEXAS:
         SECTION 1.  Section 341.0357, Health and Safety Code, is
  amended to read as follows:
         Sec. 341.0357.  IDENTIFICATION REQUIREMENT FOR CERTAIN
  [DEVICE WITH APPEARANCE OF] FIRE HYDRANTS AND FLUSH VALVES [HYDRANT
  THAT IS NONFUNCTIONING OR UNAVAILABLE FOR USE IN FIRE
  EMERGENCY].  (a) In this section, "hydrant" means:
               (1)  a fire hydrant; or
               (2)  a metal flush valve that:
                     (A)  has [The owner of any device having] the
  appearance of a fire hydrant; and
                     (B)  [that] is located in a place that an entity
  responsible for providing fire suppression services in a fire
  emergency would expect a fire hydrant to typically be located.
         (b)  Each public water system responsible for any hydrant
  shall:
               (1)  paint all or the cap of the hydrant white if the
  hydrant is available to be used only to fill a water tank on a fire
  truck used for fire suppression services; and
               (2)  paint all or the cap of the hydrant [device] black
  if the hydrant [device] is [nonfunctioning or otherwise]
  unavailable for use by the entity providing fire suppression
  services in a fire emergency.
         (c)  For purposes of Subsection (b)(2), a hydrant is
  unavailable for use in a fire emergency if it is unavailable for
  pumping directly from the hydrant or is unavailable for use in
  filling a water tank on a fire truck used for fire suppression
  services.
         (d)  A public water system [The owner] may place a black tarp
  over the hydrant or use another means to conceal the hydrant
  [device] instead of painting all or the cap of the hydrant [device]
  black as required under Subsection (b)(2) [this section] if the
  hydrant [device] is temporarily [nonfunctioning, or temporarily]
  unavailable for use in a fire emergency[,] for a period not to
  exceed 45 [seven] days. Not later than the 45th day after the date a
  hydrant is concealed as provided by this subsection, the public
  water system responsible for the hydrant shall:
               (1)  if the hydrant is available for the provision of
  fire suppression services, remove the tarp or other means of
  concealment; or
               (2)  if the hydrant continues to be unavailable for use
  in a fire emergency, paint all or the cap of the hydrant black as
  required by Subsection (b)(2).
         (e)  A public water system that paints all or the cap of a
  hydrant black as required by Subsection (b)(2) may also ensure by
  any reasonable means that the hydrant is identifiable in low-light
  conditions, including by installing reflectors.
         (f)  [(b)]  For purposes of this section, a hydrant [device]
  is considered to be unavailable for use by an entity responsible for
  providing fire suppression services in a fire emergency if:
               (1)  the public water system is not obligated by
  ordinance, regulation, or contract to provide water for fire
  suppression services and elects not to provide water for those
  services; or
               (2)  the hydrant delivered less than 50 gallons of
  water per minute during its most recent flow test under normal
  conditions [nonfunctioning if the device pumps less than 250
  gallons of water per minute].
         (g) [(c)]  This section does not apply:
               (1)  within the jurisdiction of a governmental entity
  that maintains its own system for labeling or color coding its
  hydrants; or
               (2)  to any public water system that has entered into a
  contract with a municipality or volunteer fire department to
  provide a water supply for fire suppression services if the
  contract specifies a different system for labeling or color coding
  hydrants [a device having the appearance of a fire hydrant that is
  nonfunctioning or otherwise unavailable for use in a fire
  emergency].
         (h)  For purposes of Subsection (g), a system for labeling
  or color coding hydrants may include the assignment of different
  colors to identify hydrants that are available for direct pumping,
  hydrants that are available for filling a water tank on a fire truck
  used for fire suppression services, and hydrants that are
  unavailable for use by an entity providing fire suppression
  services in a fire emergency.
         (i)  The fact that all or the cap of a hydrant for which a
  public water system is responsible under this section is not
  painted black as described by Subsection (b)(2) or concealed in the
  manner described by Subsection (d) does not constitute a guarantee
  by the public water system that the hydrant will deliver a certain
  amount of water flow at all times. Notwithstanding any provision of
  Chapter 101, Civil Practice and Remedies Code, to the contrary, a
  public water system is not liable for a hydrant's inability to
  provide adequate water supply in a fire emergency.
         SECTION 2.  Not later than January 1, 2012, each public water
  system responsible for hydrants under Section 341.0357, Health and
  Safety Code, as amended by this Act, shall ensure that its hydrants
  comply with the requirements imposed by that section.
         SECTION 3.  This Act takes effect immediately if it receives
  a vote of two-thirds of all the members elected to each house, as
  provided by Section 39, Article III, Texas Constitution.  If this
  Act does not receive the vote necessary for immediate effect, this
  Act takes effect September 1, 2011.
feedback